Posts:
2
From:
Registered:
7/26/09
|
|
|
|
AHCI SATA device not recognized, ahci_port_reset failure
Posted:
Jul 26, 2009 7:00 AM
To: Communities » storage » discuss
Cc: Communities » advocacy » awards-program
|
|
Hi!
Im having problems recognizing my sata drives connected to an
onboard Jmicron 363 SATA controller.
specifically im getting the error:
WARNING: ahci0: ahci_port_reset port 0 the device hardware has been initialized and the power-up diagnostics failed
Motherboard is Asus M2N-SLI Deluxe.
Nvidia SATA controller works just fine on this board with opensolaris
Im Running Opensolaris 1002 build 118
excerpt from system log:
Jul 26 15:17:05 Videodrome ahci: [ID 405770 kern.info] NOTICE: ahci0: hba AHCI version = 1.0
Jul 26 15:17:05 Videodrome unix: [ID 954099 kern.info] NOTICE: IRQ16 is being shared by drivers with different interrupt levels.
Jul 26 15:17:05 Videodrome This may result in reduced system performance.
Jul 26 15:17:05 Videodrome isa: [ID 202937 kern.info] ISA-device: pit_beep0
Jul 26 15:17:05 Videodrome genunix: [ID 936769 kern.info] pit_beep0 is /pci@0,0/isa@1/pit_beep
Jul 26 15:17:05 Videodrome fdc: [ID 114370 kern.info] fd0 at fdc0
Jul 26 15:17:05 Videodrome genunix: [ID 936769 kern.info] fd0 is /pci@0,0/isa@1/fdc@1,3f0/fd@0,0
Jul 26 15:17:16 Videodrome ahci: [ID 860969 kern.warning] WARNING: ahci0: ahci_port_reset port 0 the device hardware has been initialized and the power-up diagnostics failed
Jul 26 15:17:28 Videodrome ahci: [ID 860969 kern.warning] WARNING: ahci0: ahci_port_reset port 1 the device hardware has been initialized and the power-up diagnostics failed
(the drives connected are at sata4/0 and 4/1)
#cfgadm -la
Ap_Id Type Receptacle Occupant Condition
sata1/0::dsk/c9t0d0 disk connected configured ok
sata1/1::dsk/c9t1d0 disk connected configured ok
sata2/0::dsk/c10t0d0 disk connected configured ok
sata2/1::dsk/c10t1d0 disk connected configured ok
sata3/0::dsk/c11t0d0 disk connected configured ok
sata3/1::dsk/c11t1d0 disk connected configured ok
sata4/0 unknown connected unconfigured unknown
sata4/1 unknown connected unconfigured unknown
usb5/1 unknown empty unconfigured ok
usb5/2 unknown empty unconfigured ok
usb5/3 unknown empty unconfigured ok
usb5/4 unknown empty unconfigured ok
usb5/5 unknown empty unconfigured ok
usb5/6 usb-kbd connected configured ok
usb5/7 unknown empty unconfigured ok
usb5/8 unknown empty unconfigured ok
usb5/9 unknown empty unconfigured ok
usb5/10 unknown empty unconfigured ok
usb6/1 unknown empty unconfigured ok
usb6/2 usb-storage connected configured ok
usb6/3 unknown empty unconfigured ok
usb6/4 unknown empty unconfigured ok
usb6/5 unknown empty unconfigured ok
usb6/6 unknown empty unconfigured ok
usb6/7 unknown empty unconfigured ok
usb6/8 unknown empty unconfigured ok
usb6/9 unknown empty unconfigured ok
usb6/10 unknown empty unconfigured ok
# cfgadm -c configure sata4/1
cfgadm: Hardware specific failure: Failed to config device at ap_id: /devices/pci@0,0/pci10de,375@e/pci1043,81e4@0:1
|
|
